Choose your privacy height
With top-down/bottom-up you decide which part of the window is screened.
A casement window calls for a window covering that does not get in the way. Stick & Fit sits tight on the window, moves with it when you open it and leaves the space in front of the window frame clear.
With an ordinary casement window you want to be able to use the window easily. Because Stick & Fit sits on the glass, the windowsill and the space in front of the window stay clear.
With top-down/bottom-up you decide which part of the window is screened.
The pleated blind moves with it. You don't need to raise it or push it aside first.
Everything stays neatly in place, with no cords along the window frame.

In a kitchen, living room or office, a casement window is often opened several times a day. A compact system on the window is then much handier than a window covering hanging in front of it.
You don't need to damage the window frame with screws.
Take hold of the handle-free operating rail and slide the pleated blind to the height you want.
No loose cords or chains hanging within reach.
Honeycomb fabric helps keep out the cold in winter and the heat in summer.
Choose from many fabrics and five fixed colours for the profile and operating rail.
After careful measuring, you stick the profiles directly onto the glass.
For a casement window, light-filtering fabrics are often popular because you keep your privacy while the room stays bright. For a bedroom you can also choose Black-out.
Duo Tone keeps the outside white and gives colour inside. On a casement window, the product therefore also shows a neat, calm back when the window is open.
Calm outer side across several roomsSingle Tone is the same colour on both sides. That suits you if the window is often open and the chosen shade may be visible both inside and out.
Deeper shades for a distinctive interiorBlack-out darkens the fabric area and adds extra insulation. On a casement window, take the window handle, seals and free swing into account; edge light varies from situation to situation.
For dark bedrooms and guest roomsMatch the adhesive profile to the window frame or seal and choose the operating rail to suit the fabric. You decide which combination looks best.
The adhesive profile and operating rail are each available separately in RAL 9003, 9001, 7035, 7016 and 9005. You can choose both parts in the same or in different standard colours, at no extra charge for colour.
Measure the width and height of each window separately. Above all, check that there is enough flat space next to the window handle for the profile.
From compact casement windows to larger windows: a lot is possible within the standard range.
The maximum height depends on the width. Large, small or non-standard sizes are available on request.
From living room to office: easy to use and maintain.
After ordering, every product is made to measure.
For delivery to other countries, please contact us.
Dust with a soft brush or cloth. Carefully wipe a stain with a slightly damp cloth.
The refined 25 mm fabric stays close to the window.
Often possible when enough flat space remains on the window.
Suitable for living rooms, kitchens, bedrooms, studies and rented homes.
Yes, for many straight casement windows it is actually a convenient solution, because the pleated blind moves with the window.
Yes. When measuring, you take the space around the window handle into account.
RAL 9003 and RAL 9001 are popular shades. You can compare them at home with fabric samples and the profile colours.
Yes. Top-down/bottom-up is standard, so you can set the pleated blind in any position.
Standard up to 1800 mm wide and 3000 mm high. The maximum height depends on the width.
Yes. Send us the measurements and a photo and we will help you find a suitable solution.
Request free fabric samples and look at the colour at your window during the day and in the evening.