Privacy in the hallway
Screen the area around eye level and let light in at the top.
On a front door or any other door with glass, window coverings need to withstand daily use. Stick & Fit sits securely and neatly on the glass, with no loose system in the walkway.
A door may open dozens of times a day. That is why it is handy that Stick & Fit does not hang loose in front of the door, but sits directly on the glass.
Screen the area around eye level and let light in at the top.
The pleated blind moves with it and stays close to the window.
No cords, chains or tensioned side wires to get caught on.

Next to a front door, in a hallway or at a passageway, window coverings that hang in front of the window are easily knocked. Stick & Fit stays out of the way.
Less chance of someone walking into the window covering.
Avoids unnecessary wires along the door.
No screw holes in the door or window frame.
Privacy at eye level and light at the top.
Simply slide the handle-free rail up or down.
Pleasant on a front or back door where cold can get in.
For a front door, Duo Tone is popular because the outside stays white and calm. Single Tone can match the colour of the door or façade nicely. Black-out is handy for a bedroom door or another room that needs to be dark.
On a door with glass, Duo Tone keeps the outside white, while inside you choose a colour that suits the hallway or living room. This keeps the façade calm when several doors or windows are next to each other.
Calm on the outside of the houseSingle Tone shows the same colour inside and out. That works well when the fabric is meant to match a dark door, a wood colour or another distinctive material.
Colour to match the door, woodwork or stoneBlack-out darkens the fabric area and offers the strongest insulating effect. On a door, always check the space around seals, handle and moving parts; a small gap of light may remain along the edges.
For extra privacy, insulation and blackoutMatch the adhesive profile to the window frame or seal and choose the operating rail to suit the fabric. You decide which combination looks best.
The adhesive profile and operating rail are each available separately in RAL 9003, 9001, 7035, 7016 and 9005. You can choose both parts in the same or in different standard colours, at no extra charge for colour.
Measure the window in the door according to the measuring instructions. Check that the adhesive profiles do not touch the door hardware anywhere.
For tall windows in a door, a control wand can be handy.
The maximum height depends on the width. Large, small or non-standard sizes are available on request.
Strong in daily use and easy to clean.
Delivered made to measure.
For delivery to other countries, please contact us.
Gently remove dust and fingerprints with a soft or slightly damp cloth.
No cords or chains.
No drill holes in the door or window frame.
Front door, back door, balcony door, interior door and the door next to the kitchen.
Yes, for many straight windows in doors this is a very practical solution.
Because it sits tight against the glass and has no side tension cords, the chance is smaller than with a loose system in front of the door.
Yes, as long as enough space is left around the handle and lock when measuring.
Yes. With top-down/bottom-up you leave the top open.
Standard 230–1800 mm wide and 200–3000 mm high, depending on the width.
RAL 9005 for a dark line, or a light operating rail if that suits the fabric better.
Request free fabric samples and compare inside and out.