Keep the window frame intact
No screws in wood, uPVC or aluminium; the fixing is on the glass.
Compact and made to measure without screws or a surrounding frame
Stick & Fit is fitted directly on the glass with two narrow adhesive profiles. This keeps the window frame intact, the system takes up little space and the windowsill stays clear.
You are looking for a neat made-to-measure solution, but no holes, clamp frame or heavy profile around the window. Stick & Fit combines slim fitting with a full choice of fabrics and colours.
Window coverings without drilling are at their best when they stay compact, the window can keep moving and the window frame stays intact. That is why Stick & Fit is fitted directly on the glass.
No screws in wood, uPVC or aluminium; the fixing is on the glass.
Only narrow side profiles, so the window handle, glass surface and windowsill stay as clear as possible.
The system stays against the glass and moves with the sash on suitable tilt-and-turn windows.
A complete made-to-measure honeycomb pleated blind, without the extra cost and bulk of a surrounding frame.

Why Stick & Fit works differently
The profiles are attached to the glass on the left and right. The cords are tightly tensioned and the operating rails have a hollow grip area. The result is a sturdy system that stays firmly in place when properly prepared and fitted.
Anyone searching for window coverings without drilling often ends up with a pleated blind with adhesive strip. Stick & Fit is also searched for as a pleated blind with adhesive profile or an adhesive pleated blind on glass. In every case it is the same slim fitting directly on the glass.
The broad benefits of Stick & Fit
Each page explains a different problem, but these product benefits are always part of the solution.
Fitted with narrow adhesive profiles on the glass on the left and right; the window frame stays free of drill holes.
No surrounding frame around the window. The windowsill stays clear and the system sits compactly on the glass.
The fabric can be set to any position, infinitely: from the top, from the windowsill or just in the middle.
The honeycomb fabric combines light control with an extra layer of air by the window. The choice between light-filtering and Black-out determines how much light and heat you want to keep out.
No loose operating chain or cords; you operate the system directly with the handle-free rails.
Single Tone, Duo Tone and Black-out, many fabric colours and five colours for adhesive profiles and operating rails.
An affordable made-to-measure solution that is usually cheaper and more compact than a pleated blind in a full frame.
Because no surrounding frame is needed, the glass surface stays calm and slim. The fabric softens the look of the window without a heavy construction in front of the window frame.
From search query to product choice
All versions have the same compact fitting. The fabric mainly determines how much light, heat protection and blackout you get.
Single Tone or Duo Tone filters daylight and gives complete privacy behind the closed fabric.
Honeycomb fabric traps air and so contributes to insulation in warm and cold weather.
Black-out lets no light through the fabric and is also the strongest choice for insulation against heat and cold.
Practical and ready to use
Fitting on the glass brings four clear benefits in appearance, ease of use and price.
Just a narrow adhesive profile on the left and right.
Windowsill, window frame and window handle stay uncluttered.
Top-down/bottom-up gives any position you want.
Made to measure without the price and size of a complete frame.
Frequently asked questions
Clear answers about use, fabric choice, installation and expectations.
Yes. On clean, grease-free and suitable glass, the tape forms a strong, durable bond. When fitted correctly, the system will not come loose by itself.
Stick & Fit does not use a full surrounding frame and is therefore usually more compact and more favourably priced, while still being fully made to measure.
Yes. The standard top-down/bottom-up operation means you can open from the top as well as from the windowsill, and also place the fabric just in the middle.
The honeycomb structure traps still air and so contributes to insulation. Black-out is the strongest choice in the range for this.
There is no loose operating chain and there are no loose operating cords. The fabric is operated with the handle-free top and bottom rails.
Read on
From product benefit to your window
Request free samples to compare colour and light transmission, or go straight to the configurator. There you choose the size, fabric, adhesive profile and operating rail.