Decide where you need privacy
With tall windows, often only the lower or middle part can be seen into.
A tall window lets in lots of light, but can also mean people can see in, heat build-up or awkward operation. Stick & Fit sits subtly on the glass and, with a control wand, is easy to reach even higher up.
With the right size and a control wand, you don't need to stand on a chair. You simply move the pleated blind higher, lower or to the middle.
With tall windows, often only the lower or middle part can be seen into.
100, 150 or 200 cm, depending on the height and how easy it is to reach.
Close the pleated blind further when you want to reduce heat or bright sunlight.

Tall windows make a room feel spacious. With Stick & Fit you keep that light feeling, while deciding for yourself how much you cover.
Let daylight in at the top and block the view in lower down.
No complicated motor needed when a wand will do.
Helps to better shield the large window area against cold and heat.
Safe, even when the window is above stairs or furniture.
The window covering stays close to the window and takes up little space.
For very tall or larger windows, electric solutions with the same fabrics are also possible.
With a tall window, the incoming light makes a big difference. Duo Tone keeps the outer side calm, Single Tone adds colour and Black-out is suitable when you really want to block a lot of light.
On a tall window, Duo Tone gives a calm column of colour inside and keeps the outer side white. This helps tall façades look uniform from outside.
Calm on the outside of the houseSingle Tone shows the same shade on both sides and emphasises the height of the window. A mid-tone often looks calmer than a very large dark contrast.
Deep colours for tall accentsBlack-out darkens the fabric area and provides the strongest insulation. The maximum height is linked to the width; light at the edges depends on the rubber seals and window shape.
For bedrooms, projection rooms and keeping out heatMatch the adhesive profile to the window frame or rubber seal, and choose the operating rail to go with the fabric. You decide which combination looks best.
The adhesive profile and operating rail are each available separately in RAL 9003, 9001, 7035, 7016 and 9005. You can choose the same or different standard colours for both parts, with no colour surcharge.
The maximum height is linked to the width of the window. That's why we assess tall and non-standard sizes carefully.
For a tall window, always follow the exact measuring instructions and contact us if in doubt.
The maximum height depends on the width. Large, small or non-standard sizes are available on request.
Easy to reach, easy to keep clean and delivered quickly.
Tall products are also fully made to measure.
For delivery to other countries, please contact us.
Dust gently with a soft brush or cloth.
Blackout and extra insulating when measured correctly.
Widely used in stairwells, offices, conservatories and high-ceilinged living rooms.
Special fabrics are available for public buildings, restaurants and cafés.
The standard maximum height is 3000 mm. The exact maximum height depends on the width.
With a control wand of 100, 150 or 200 cm.
Not as a Stick & Fit version, but the same fabrics are available on request in electric pleated or honeycomb systems.
Black-out is a blackout fabric. The light that ultimately comes in along the edges depends on the window and the rubber seals.
Often, yes, but height and width must be assessed together.
Yes. Send the measurements, the height from the floor and a photo of the window.
Request free samples and see how the fabric reacts to the light in your room.