Privacy where you want it
Set the pleated blind low, high or in the middle. Daylight can still come in at the top and bottom.
Stick & Fit sits tight on the window and moves with it when you turn or tilt the window. So you keep privacy and daylight, without drilling and without a bulky system in front of the window frame.
Short answer: yes. Stick & Fit is fixed to the glass with two adhesive profiles and moves with the opening sash. You open or tilt the window in whatever position the blind is in; it does not have to be raised first. This also works on a casement window without a tilt position. Just make sure there is enough flat space next to the window handle.
The narrow adhesive profiles sit on the left and right of the glass. This keeps the system compact and it simply moves with the window.
Set the pleated blind low, high or in the middle. Daylight can still come in at the top and bottom.
Because Stick & Fit sits on the window, the space in front of it stays clear.
The pleated blind stays firmly in place. No cords hang along the window frame.

On a window that is opened and closed often, a solution on the glass is especially convenient. The window handle stays accessible and the window covering is safely out of the way.
You don't have to screw into a uPVC, wooden or aluminium window frame.
Screen only the part where people can see in and keep the rest of the window bright.
The honeycomb fabric helps against cold and heat and gives a calm look.
If you measure carefully, fitting is easy even if you're not very handy.
Nothing hangs along the window frame that can dangle or get damaged.
You set the pleated blind at exactly the height that suits you at that moment.
For a tilt-and-turn window you can choose light-filtering, more colour or full blackout. With fabric samples you can see at home what suits best.
On a tilt-and-turn window, Duo Tone gives colour on the room side and white on the outside. This keeps the façade calm when different windows are open, closed or tilted.
Lovely for living rooms and kitchensSingle Tone shows the same colour on both sides. That suits you if you want to see the same shade inside and out and the window is tilted regularly.
Extra colour that is also visible from outsideBlack-out darkens the fabric area and has the strongest insulating effect. Depending on the seals and the shape of the tilt-and-turn window, a small gap of light may remain visible along the edges.
Ideal for bedrooms and guest roomsMatch the adhesive profile to the window frame or seal and choose the operating rail to suit the fabric. You decide which combination looks best.
The adhesive profile and operating rail are each available separately in RAL 9003, 9001, 7035, 7016 and 9005. You can choose both parts in the same or in different standard colours, at no extra charge for colour.
Measure each window separately. Pay particular attention to the space next to the window handle, the seals and any trickle vent.
Many tilt-and-turn windows fall within the standard size range. For non-standard sizes we are happy to help.
The maximum height depends on the width. Large, small or non-standard sizes are available on request.
The most important practical information clearly in one place.
The usual delivery time is approx. 8–10 working days.
Your order is shipped free of charge within the Netherlands, Belgium, Germany and France. For delivery to other countries, please contact us.
Use a soft brush or duster. You can carefully wipe off a stain with a slightly damp cloth.
Black-out is room-darkening and provides extra insulation.
In a well-ventilated bathroom Stick & Fit can often be used without any problem.
You don't make any screw holes in the window frame and fitting is easy.
Stick & Fit fits many straight tilt-and-turn windows made of uPVC, wood and aluminium. There must be enough flat space for the adhesive profiles.
For privacy with plenty of daylight, Duo Tone and Single Tone are good choices. For a bedroom, Black-out is ideal.
Yes. Both are available in RAL 9003, 9001, 7035, 7016 and 9005. So the adhesive profile can match the window frame and the operating rail the fabric.
The standard width ranges from 230 to 1800 mm and the height from 200 to 3000 mm. The maximum height depends on the width.
Yes. Control wands are available in 100, 150 and 200 cm.
Use a soft brush or duster. You can carefully wipe off a small stain with a slightly damp cloth.
Yes, for many straight casement windows it is actually a convenient solution, because the pleated blind moves with the window.
Yes. When measuring, you take the space around the window handle into account.
Yes. Send us the measurements and a photo and we will help you find a suitable solution.
Yes. With correct preparation and fitting, the tape stays firmly on suitable glass and the system moves with the window sash.
The mounting has been developed for normal use on windows and is resistant to the usual changes in heat and cold. A clean, grease-free surface and correct fitting are essential.
No. You can open or tilt the window in the chosen top-down/bottom-up position.
Request free fabric samples and compare the colours at your window, window frame and daylight. Then you can measure and order at your leisure. See all prices by size.