Measure the narrowest width
Check at the top, middle and bottom and use the correct size according to the measuring instructions.
With a narrow window you don't want a large system that stands out more than the window itself. Stick & Fit is refined, sits on the glass and is available as standard from 230 mm wide.
Top-down/bottom-up is especially handy on narrow windows. You can screen off the lower part and let light in at the top.
Check at the top, middle and bottom and use the correct size according to the measuring instructions.
Let the adhesive profile match the window frame or seal.
Low for privacy, in the middle for balance or fully closed for more calm.

No large head box or wide side guides. The slim profiles and 25 mm fabric keep the whole calm.
Many narrow windows simply fall within the standard range.
Very suitable when you only want to limit people looking in at eye level.
Safe and calm, also next to a door.
No screw holes in a narrow or fragile window frame.
Choose a light shade to keep the window feeling spacious, or a dark colour as an accent.
The light, compact product is easy to fit.
A light Duo Tone fabric keeps a narrow window calm. Single Tone gives more colour and Black-out is handy for a narrow bedroom or bathroom window.
Duo Tone gives a narrow window colour on the inside and a white back on the outside. This is especially attractive for side lights and narrow windows that form one façade together with a door.
White outside for a calm overall lookSingle Tone shows the same colour on both sides and turns a narrow window into a distinct vertical accent. Light shades make the glass surface look more spacious.
More colour on a small windowBlack-out darkens the fabric surface and offers extra insulation. With a narrow window, careful measuring and enough space around the operation are decisive.
Plenty of blackout in little spaceMatch the adhesive profile to the window frame or seal and choose the operating rail to go with the fabric. You decide which combination looks best.
The adhesive profile and operating rail are each available separately in RAL 9003, 9001, 7035, 7016 and 9005. You can choose both parts in the same or in different standard colours, at no extra charge for colour.
Is your window narrower than 230 mm? Then please get in touch. Non-standard sizes are sometimes possible on request.
The height can go up to 3000 mm as standard, with the maximum height depending on the width.
The maximum height depends on the width. Large, small or non-standard sizes are available on request.
Practical in the bathroom, hallway, kitchen or dormer.
The pleated blind is made completely to measure.
Small orders are also shipped free of charge.
Dust with a soft brush or duster; gently wipe stains with a slightly damp cloth.
A narrow bathroom window is often suitable when the room is well ventilated.
Without side guide cords, it is a safe choice next to a front door.
Top-down/bottom-up is ideal for a window close to a pavement or neighbours.
The standard minimum width is 230 mm. Smaller sizes are sometimes possible on request.
No. The 25 mm fabric and narrow profiles have been chosen precisely for a refined look.
Yes. With top-down/bottom-up you can keep an open section at the top and bottom.
Choose the colour closest to the window frame or seal: 9003, 9001, 7035, 7016 or 9005.
Yes. With careful measuring, this can give a high degree of blackout.
Yes, three lengths are available for tall narrow windows.
Request free fabric samples and hold them against the narrow window, the window frame and the wall.