Plenty of light during the day
Leave the top open so daylight reaches deep into the room.
By window type · fixed window
Pleated blinds for a fixed window
A fixed window is ideal for a calm, neat solution on the glass. With Stick & Fit you control privacy, light and warmth without a large system in front of the window frame.
Privacy and daylightInsulating honeycomb fabricDiscreet, without drilling
A calm window lookThe system is barely noticeable.
Control the light yourselfOpen at the top, bottom or in the middle.
From open views to comfortable privacy
You decide how much of the window remains visible
A fixed window does not need to open, so you can focus entirely on light, privacy and appearance. Top-down/bottom-up makes that very flexible.
Privacy at eye level
Slide the pleated blind exactly in front of the part where people can look in.
More calm or darkening
Close off the window further when you want less light or more heat protection.
Calm in the interiorLovely with large windows, bay windows, offices and modern living rooms.
Why on a fixed window?
Neat, refined and without unnecessary parts
No chain, no cassette and no wide headrail box. Only the pleated blind and the slim rails remain visible.
Top-down/bottom-up as standard
You keep your view where possible and your privacy where needed.
Insulates against cold and heat
The honeycomb structure forms an extra layer of still air.
No drilling
The window frame stays free of screw holes.
Many colours
From calm white and sand to deep grey and black.
Child-safe
No loose-hanging cords or chains.
Easy to keep clean
Regular dusting is usually enough.
25 mm fabrics
Choose light, colour or full blackout
On a fixed window the fabric really comes into its own. Duo Tone gives a calm white look from outside, Single Tone shows more colour and Black-out makes a room almost dark.
Duo Tone
Duo Tone offers a chosen colour inside and a white back outside. On a fixed window, the exterior appearance therefore stays permanently calm and even.
For a calm street viewSingle Tone
Single Tone shows the same colour on both sides. This is a good choice when the fabric may be a visible part of the architecture or window frame colour from outside.
For colour that matches stone or woodBlack-out
Black-out darkens the fabric area and provides extra insulation. On a fixed window, it is mainly the fit against the rubber seals that determines how much light is still visible at the edges.
For bedrooms, presentation rooms and TV roomsAdhesive profile and operating rail don't need to be the same colour
Match the adhesive profile to the window frame or rubber seal, and choose the operating rail to go with the fabric. You decide which combination looks best.
RAL 9003
RAL 9001
RAL 7035
RAL 7016
RAL 9005
The adhesive profile and operating rail are each available separately in RAL 9003, 9001, 7035, 7016 and 9005. You can choose the same or different standard colours for both parts, with no colour surcharge.
Made to measure for fixed windows
From a small window to a wide run of windows
Measure each fixed window separately. With several windows side by side, it looks good when the top and bottom lines are level.
Standard size range
The standard size range is 230 to 1800 mm wide and 200 to 3000 mm high.
Width230–1800 mm
Height200–3000 mm
The maximum height depends on the width. Large, small or non-standard sizes are available on request.
Practically arranged
A fixed solution, practically arranged
Everything you want to know in advance.
Approx. 10 working days
Every pleated blind is made specially for your window.
Free delivery
In the Netherlands, Belgium, Germany and France you pay no shipping costs.
25 mm fabric
A refined size that looks calm on small and large windows alike.
Flame-retardant on request
Special fabrics are available for offices, hospitality venues and public buildings.
Quick to clean
Soft brush, duster or, for a stain, a slightly damp cloth.
Free fabric samples
See the colours at home before you order.
Living roomOfficeBay windowConservatoryWinter gardenBedroomRestaurants & cafés
Frequently asked questions
Questions about Stick & Fit on a fixed window
Is a fixed window suitable for Stick & Fit?
Yes. A straight fixed window with a smooth, flat surface is often very suitable.
Can I screen off just the middle of the window?
Yes. With top-down/bottom-up you can set the pleated blind in any position you like.
Which fabric helps best against heat?
All honeycomb fabrics insulate. Black-out also blocks almost all light.
How do I make several windows look the same?
Measure each window separately and choose the same fabric, profile colours and positioning.
What if the window is wider than 1800 mm?
Please get in touch. Sometimes a division or another pleated blind solution with the same fabric is possible.
Are flame-retardant fabrics available?
Yes, on request. This collection is suitable for situations where flame retardancy is required.
Other window types
You may also like
Find the right fabric for your fixed window
Order free samples and compare light-filtering, colour and Black-out in your own room.
