Measure on the window
Use the instructions and check the space around handles and seals.
You want to keep a wooden window frame looking good. With Stick & Fit you don't have to screw through paintwork or wood, and the window covering stays subtly on the glass.
Because Stick & Fit sits on the glass, the wood stays visible. That is attractive in older homes, wooden conservatories and window frames with character.
Use the instructions and check the space around handles and seals.
Choose the adhesive profile to go with the paintwork and the operating rail to go with the fabric.
The slim profiles are stuck on and the wood stays free.

From white 1930s window frames to dark stained wood: with five profile colours there is almost always a calm combination.
You don't have to drill through varnish or paint.
Popular with cream and white painted window frames.
Attractive with dark woodwork and modern extensions.
A deeper fabric colour can go nicely with wood or brick.
Welcome with older windows and large wooden window frames.
Calm and safe in use.
Duo Tone is handy when different rooms need to keep one white appearance from outside. Single Tone, on the other hand, can blend beautifully with brick, wood or paintwork. Black-out provides extra blackout and insulation.
Duo Tone combines a coloured room side with white outside. This keeps the outside view calm, even when wooden window frames are painted in different colours inside.
Calm white from outsideSingle Tone is the same colour on both sides and can go nicely with wood, stain or a dark paint colour. The fabric then deliberately becomes part of the look of the window frame.
Warm and deep colours with woodBlack-out darkens the fabric surface and provides extra insulation. Check that the glass, seals and paintwork are flat, clean and suitable; some light may still come in along the edges.
For bedroom, guest room or studyMatch the adhesive profile to the window frame or seal and choose the operating rail to go with the fabric. You decide which combination looks best.
The adhesive profile and operating rail are each available separately in RAL 9003, 9001, 7035, 7016 and 9005. You can choose both parts in the same or in different standard colours, at no extra charge for colour.
Woodwork can vary slightly more than smooth uPVC. So measure each window separately and ask for advice if the shape or edge is irregular.
The standard sizes range from 230–1800 mm wide and 200–3000 mm high.
The maximum height depends on the width. Large, small or non-standard sizes are available on request.
A neat solution that stays simple.
Made to measure for every window.
For delivery to other countries, please contact us.
Dust with a soft brush or cloth.
Honeycomb fabric helps against cold downdraughts and heat from the sun.
Living room, bedroom, kitchen, conservatory and dormer.
We are also happy to advise on older window frames.
No. Stick & Fit is fitted on the glass.
Often it does, as long as the window is straight and there is enough flat space for the profiles.
RAL 9001 is often a good combination. If in doubt, request colour samples.
Yes. With Single Tone, the same colour is visible on the outside.
The honeycomb structure provides extra insulation against cold and heat.
Send photos and measurements. We can then assess in advance what is possible.
With free fabric samples you can see which shade goes best with paint, wood and interior.