1
Bathroom window facing the street
Close off the line of sight and let daylight in along the top.
Compact on the glass, without drilling into tiles or the window frame
Window coverings for humid rooms with privacy and light
In the bathroom and toilet you want immediate privacy without making the room unnecessarily dark. Stick & Fit sits compactly on the glass and, with top-down/bottom-up, leaves exactly the light opening you want.
- Complete privacy behind any closed fabric
- Daylight above or below the privacy zone
- No drill holes in tiles, wood, uPVC or aluminium
- Windowsill kept clear and compact on small windows
window coverings humid roombathroom window coverings without drillingprivacy bathroom windowpleated blind bathroomtoilet window blind
Ventilation remains essentialOpen the fabric to let the glass and window area dry.
Stick & Fit made to measure230–1800 mm wide and 200–3000 mm high, per individual pane of glass.
The key question is usually not how much moisture a room has, but where the window is: away from direct splashing water, with normal ventilation and enough opportunity to dry, the compact fitting works well in practice.
Start with the situation you want to solve
In a humid room, ventilation, dry installation and regular wiping are more important than the fabric colour alone. Do not place the system where it constantly gets wet.
2
Small toilet window or transom
The minimum size and compact profiles fit well on small panes of glass.
3
No drilling into tiles
Installation is on the glass, not in the tiling or the window frame.
4
Condensation and ventilation
The pleated blind stays close to the window without cluttering the windowsill.
Privacy without a dark bathroom
Opaque fabric and an infinitely adjustable open daylight section
All fabrics are opaque. With the top and bottom rails you decide which part of the glass is closed. This keeps the privacy zone at the right height and lets light in above or below.
Privacy at the bottomLet daylight in at the top while the lower part stays screened.
Close completelyFor showering or using the toilet, the whole glass can be covered.
No fitting in tilingThe adhesive profiles go on the glass, not in the wall or window frame.
Open to drySlide the fabric open after use so that air can circulate along the glass and fabric.
The broad benefits of Stick & Fit
More than just window coverings without drilling
Each page explains a different problem, but these product benefits are always part of the solution.
Fitted with narrow adhesive profiles on the glass on the left and right; the window frame stays free of drill holes.
No surrounding frame around the window. The windowsill stays clear and the system sits compactly on the glass.
The fabric can be set to any position, infinitely: from the top, from the windowsill or just in the middle.
The honeycomb structure forms a layer of air by the glass, but cannot prevent condensation. Airing the room well and keeping the window surface dry remain necessary.
No loose operating chain or cords; you operate the system directly with the handle-free rails.
Single Tone, Duo Tone and Black-out, many fabric colours and five colours for adhesive profiles and operating rails.
An affordable made-to-measure solution that is usually cheaper and more compact than a pleated blind in a full frame.
The fabric softens the hard look of tiles and glass. Choose a shade that stays calm in the bathroom or toilet in changing daylight and artificial light.
From search query to product choice
Choose fabric for privacy and light
For most bathrooms, a light-filtering opaque fabric is the best balance.
Single Tone
Calm light filtering and complete privacy behind the fabric.
Duo Tone
Light-filtering with a white outside.
Black-out
For maximum screening and the strongest insulation, but with less light when fully closed.
Practical and ready to use
Four reasons why Stick & Fit works compactly here
Fitting on the glass keeps the room calm and functional.
Fixed to the glass.
Infinitely adjustable to the height you want.
No separate stand or wide cassette.
Handle-free rails without a chain.
Frequently asked questions
Frequently asked questions about window coverings for humid rooms with privacy and light
Clear answers about use, fabric choice, installation and expectations.
Is Stick & Fit suitable for a bathroom?
Yes, in a suitable place away from direct and constant splashing water. Normal ventilation and letting things dry remain important for any window covering in a humid room.
Do light-filtering fabrics offer enough privacy?
Yes. Single Tone and Duo Tone are opaque. They let filtered daylight through, but nobody can see in through the fabric.
Can I avoid drilling into tiles?
Yes. Stick & Fit is attached to the glass with adhesive profiles and requires no screws in tiles or the window frame.
Will it fit a small toilet window?
The minimum width is 230 mm and the minimum height 200 mm, so many small, rectangular panes of glass are possible.
Which fabric is best against cold glass?
All honeycomb fabrics contribute to insulation; Black-out offers the strongest insulating effect.
Read on
Related situations and solutions
From product benefit to your window
Choose the fabric, colour and size that suit your situation
Compare samples at home and check the area around the window before you order. The installation and measuring pages give you the practical requirements for a neat fit.
