Measure the window carefully
Follow the measuring instructions and pay attention to the space by the window handle and seals.
By window type · uPVC window frame
Pleated blinds for uPVC window frames
With a uPVC window frame, you would rather not drill. Stick & Fit is placed on the glass, so the window frame stays neat and the window can be used as normal.
No screws in uPVCFive colours for a calm matchFor casement, tilt and fixed windows
Window frame stays neatNo drill holes needed.
Suits both white and dark uPVCFrom RAL 9003 to RAL 9005.
Sticking instead of drilling
A logical choice for uPVC windows
The adhesive profiles go on the left and right of the glass. That means you don’t need to put any screws into the uPVC.
Clean the glass
A clean, grease-free surface helps with a neat installation.
Stick on the profiles
Then you fit and operate the pleated blind without loose hanging cords.
Also handy in a rented homeNo screw holes in the uPVC window frame.
Neat on every type of uPVC window
From fixed window to tilt-and-turn window
uPVC windows often have a smooth, clean finish. That is why the subtle look of Stick & Fit suits them well.
Without drilling
The main reason to choose Stick & Fit on uPVC.
Five matching profile colours
White, cream, light grey, anthracite and black.
Window handle stays within reach
With careful measuring, the window’s operation stays unobstructed.
Top-down/bottom-up
Control privacy and daylight precisely.
Child-safe
No cords or chains.
Easy to fit yourself
No special tools or installation company needed.
25 mm fabrics
Choose light, colour or full blackout
With white uPVC window frames, Duo Tone fabrics are popular because of their calm white outer side. Dark uPVC window frames combine beautifully with Single Tone and a profile in RAL 7016 or 9005.
Duo Tone
Duo Tone gives colour inside and keeps the outer side white. That goes well with white uPVC window frames and also creates a uniform façade with different room colours.
White outside with any inside colourSingle Tone
Single Tone shows the same shade on both sides. With anthracite or black uPVC, a dark fabric can emphasise the line of the window frame; with white, a light shade stays calmer.
Dark shades with anthracite uPVCBlack-out
Black-out darkens the fabric area and is the most insulating choice. Thick seals or a deep glazing bead may still cause a small gap of light along the side.
Black-out for uPVC bedroom windowsAdhesive profile and operating rail do not have to be the same colour
Match the adhesive profile to the window frame or seal and choose the operating rail to suit the fabric. You decide which combination looks best.
RAL 9003
RAL 9001
RAL 7035
RAL 7016
RAL 9005
The adhesive profile and operating rail are each available separately in RAL 9003, 9001, 7035, 7016 and 9005. You can choose both parts in the same or in different standard colours, at no extra charge for colour.
Measuring on uPVC windows
Pay attention to seals, handles and trickle vents
With a tilt-and-turn window, the clearance next to the handle is especially important. With a fixed window, it is mainly about straight, flat placement.
Standard size range
Standard from 230–1800 mm wide and 200–3000 mm high.
Width230–1800 mm
Height200–3000 mm
The maximum height depends on the width. Large, small or non-standard sizes are available on request.
Practically arranged
Practical with uPVC window frames
Easy to order, fit and maintain.
Delivery time approximately 10 working days
Produced to measure.
Free delivery
In the Netherlands, Belgium, Germany and France.
No specialist needed
Fitting is easy to do, even if you’re not handy.
Cleaning
Soft brush or duster; carefully wipe stains with a slightly damp cloth.
Many rooms
Living room, kitchen, bedroom, bathroom, office and dormer.
Also for rented homes
No drill holes in the uPVC.
Tilt-and-turn windowFixed windowBedroomKitchenBathroomDormerRented home
Frequently asked questions
Questions about uPVC window frames
Do I have to drill into a uPVC window frame?
No. Stick & Fit is placed on the glass.
Does Stick & Fit fit a uPVC tilt-and-turn window?
Often it does. When measuring, pay attention to the window handle, seals and the available flat space.
Which profile colour suits anthracite?
RAL 7016. For an even darker look, RAL 9005 is available.
Can the adhesive profile have a custom colour?
No. The adhesive profile and operating rail are both available in five fixed colours. You can, however, choose the two parts separately in different standard colours.
Is Black-out possible?
Yes, and with careful measuring this gives a high degree of darkening.
How quickly is it delivered?
The usual delivery time is approximately 10 working days.
Other window types
You may also like
Compare white, cream, grey and black at home
Request free fabric samples and hold them right next to the uPVC window frame.
