1
Fabric does not hang forward
The cords are tensioned and keep the pleated blind close to the glass.
Close to the glass when turning, opening and tilting
Window dressing that moves with the window
Because Stick & Fit sits on the glass of the window sash, the system stays attached to the window on a suitable tilt-and-turn window. The fabric does not hang loose in front of the window and does not need to be fully raised first.
- Strong, durable adhesive mounting on clean glass
- Resistant to normal changes in heat and cold at the window
- Compact and without a surrounding frame
- Top-down/bottom-up remains usable in every window position
window coverings that move with the windowpleated blind tilt-and-turn windowwindow covering on the window sashpleated blind without drilling tilt-and-turnstick fit tilt window
Turns and tilts with the windowThe chosen position stays on the window.
Stick & Fit made to measure230–1800 mm wide and 200–3000 mm high, per individual glass pane.
With a moving window, separate window coverings are often awkward. Stick & Fit stays on the window sash, so opening, closing and tilting feel much more natural.
Start with the situation you want to solve
On a casement or tilt window, window coverings need to stay close to the glass and move clear of the window handle. The measurements and position of the adhesive profile are therefore decisive.
2
No need to raise it fully first
The window can be opened or tilted with the fabric in the chosen position.
3
No frame getting in the way
Only narrow profiles on the left and right; no wide surround.
4
Everyday use
The mounting is designed for repeated operation and for moving with the window.
Solid fixing on the window sash
The adhesive profiles stay firmly in place during normal opening and tilting
The tape is applied to clean, grease-free and suitable glass and forms a strong bond. When fitted correctly, the system will not come loose by itself, not even due to normal temperature changes at the window.
Tilt position with privacyLeave the fabric in the lower or middle section while the window ventilates.
Clear windowsillNo long fabric hanging in front of plants, accessories or worktop.
No protruding handleYou grip the hollow operating rail directly, and it stays compact.
One product per glass paneWith several windows, you operate each moving section separately.
The broad benefits of Stick & Fit
More than just window coverings without drilling
Each page explains a different problem, but these product benefits are always part of the solution.
Fitted with narrow adhesive profiles on the left and right of the glass; the window frame stays free of drill holes.
No surrounding frame around the window. The windowsill stays clear and the system sits compactly on the glass.
The fabric can be set steplessly in unlimited positions: from the top, from the windowsill or only in the middle.
The honeycomb fabric stays tensioned between the operating rails and forms a compact layer of air at the glass. As a result, no loose curtain hangs forward in the tilt position.
No loose operating chain or cords; you operate the system directly with the handleless rails.
Single Tone, Duo Tone and Black-out, many fabric colours and five colours for adhesive profiles and operating rails.
An affordable made-to-measure solution that is usually cheaper and more compact than a pleated blind in a full frame.
The fabric softens the glass surface, but the main gain is practical: the product turns and tilts with the window without a loose chain or heavy frame.
From search query to product choice
One window, every position and every fabric choice
Mobility does not limit your choice of fabric: light-filtering, Duo Tone and Black-out are all possible.
Privacy while ventilating
Leave the fabric at the desired line of sight while the window is tilted.
Comfort in warm and cold weather
Honeycomb fabric contributes to insulation; Black-out is the strongest choice.
Compact appearance
Match the profiles to the window frame and fabric so that the system blends visually into the window.
Practical and ready to use
What you notice every day from window coverings that move with the window
The system stays close to the glass and keeps daily opening, tilting, operating and closing straightforward.
Window and window covering move as one.
The tensioned fabric stays close to the glass.
Top-down/bottom-up remains available steplessly.
No loose curtain getting caught between window and window frame.
Frequently asked questions
Frequently asked questions about window coverings that move with the window
Clear answers about use, fabric choice, fitting and expectations.
Does Stick & Fit stay in place when opening and tilting?
Yes. With correct preparation and fitting, the tape stays firmly on suitable glass and the system moves with the window sash.
Can temperature differences loosen the adhesive mounting?
The mounting has been developed for normal use on windows and is resistant to the usual changes in heat and cold. A clean, grease-free surface and correct fitting are essential.
Does the fabric have to be fully open first?
No. You can open or tilt the window in the chosen top-down/bottom-up position.
Does the system take up much space?
No. There are only narrow adhesive profiles on the left and right. There is no full frame around the window.
Can I choose Black-out on a tilt-and-turn window?
Yes, if the glass pane and the available space are suitable. Black-out also offers the strongest insulating effect.
Read on
Related situations and solutions
From product benefit to your window
Choose the fabric, colour and size that suit your situation
View the fabric and profile colour at home with free samples, then measure each glass pane separately. The configurator then guides you through size, fabric and operation.
